IBEW Local
Inside Agreement
SECTION 2.21 Journeyman shall provide themselves
with the following tools:
Tool Box –
20” x 8 ½ “x 9” minimum with lock
Pliers: Wire Strippers Diagonal Cutters
(2 allowed)
Side cutters, 8”
or 9” Klein Type Pump
(Channel Lock) (2 allowed)
Long Nose Stake-On
Combination
Wrench Set, 3/8 – 3/4
Crescent
Wrenches – 6” and 12” (one of each)
Box Wrench
– For knock-out punch set
Allen
Wrenches – Small set not over 7/16”
Spin-Tite Wrench Set – Up to ½ “
Tap Wrench
– Up to ¼ “
Chisels: Wood, 1” maximum Cold ½ “ maximum
Center
Punch
Awl
Plumb Bob,
8 ounce
Tri-Square
Level – (1)
18” maximum
Chalk Line
Box
Tin Snips –
(1) 10” Airplane Shears
Knife
Rules –
30' maximum
Screwdrivers: Stubby (2), 1 Blade and 1 Phillips Offset (2), 1 Blade and 1 Phillips
Phillips (2), 6” and 8” Blade (3), 6”, 8” and 12”
Hacksaw
Frame
Keyhole Saw
Hammer –
Claw
Tester –
Tool Pouch
(Optional)
One-Piece
Flashlight (1)
Current NEC
Code Book
Cordless
Screwdriver, Charger, and Batteries (Optional) (not a battery operated drill
motor) [Note: see
Section 2.22 for further reference]
The
Employer will furnish necessary locked storage to reasonably protect tools from
the weather and vandalism and will replace such tools as listed above when
tools are damaged on the job or stolen from the locked storage.